segmentmodel.py

import pdb
import numpy as np
import random
from arbdmodel import PointParticle, ParticleType, Group, ArbdModel
from coords import rotationAboutAxis, quaternion_from_matrix, quaternion_to_matrix
from nonbonded import *
from copy import copy, deepcopy
from nbPot import nbDnaScheme

from scipy.special import erf
import scipy.optimize as opt
from scipy import interpolate

from CanonicalNucleotideAtoms import canonicalNtFwd, canonicalNtRev, seqComplement
from CanonicalNucleotideAtoms import enmTemplateHC, enmTemplateSQ, enmCorrectionsHC

# import pdb
"""
TODO:
 + fix handling of crossovers for atomic representation
 + map to atomic representation
    + add nicks
    - transform ssDNA nucleotides 
    - shrink ssDNA
    - shrink dsDNA backbone
    + make orientation continuous
    - sequence
    - handle circular dna
 + ensure crossover bead potentials aren't applied twice 
 + remove performance bottlenecks
 - test for large systems
 - assign sequence
 - ENM
 - rework Location class 
 - remove recursive calls
 - document
 - add unit test of helices connected to themselves
"""

class ParticleNotConnectedError(Exception):
    pass

class Location():
    """ Site for connection within an object """
    def __init__(self, container, address, type_, on_fwd_strand = True):
        ## TODO: remove cyclic references(?)
        self.container = container
        self.address = address  # represents position along contour length in segment
        # assert( type_ in ("end3","end5") ) # TODO remove or make conditional
        self.on_fwd_strand = on_fwd_strand
        self.type_ = type_
        self.particle = None
        self.connection = None
        self.is_3prime_side_of_connection = None

        self.prev_in_strand = None
        self.next_in_strand = None
        
        self.combine = None     # some locations might be combined in bead model 

    def get_connected_location(self):
        if self.connection is None:
            return None
        else:
            return self.connection.other(self)

    def set_connection(self, connection, is_3prime_side_of_connection):
        self.connection = connection # TODO weakref? 
        self.is_3prime_side_of_connection = is_3prime_side_of_connection

    def __repr__(self):
        if self.on_fwd_strand:
            on_fwd = "on_fwd_strand"
        else:
            on_fwd = "on_rev_strand"
        return "<Location {}.{}[{:.2f},{:d}]>".format( self.container.name, self.type_, self.address, self.on_fwd_strand)
        
class Connection():
    """ Abstract base class for connection between two elements """
    def __init__(self, A, B, type_ = None):
        assert( isinstance(A,Location) )
        assert( isinstance(B,Location) )
        self.A = A
        self.B = B
        self.type_ = type_
        
    def other(self, location):
        if location is self.A:
            return self.B
        elif location is self.B:
            return self.A
        else:
            raise Exception("OutOfBoundsError")

    def __repr__(self):
        return "<Connection {}--{}--{}]>".format( self.A, self.type_, self.B )
        

        
# class ConnectableElement(Transformable):
class ConnectableElement():
    """ Abstract base class """
    ## TODO: eliminate mutable default arguments
    def __init__(self, connection_locations=[], connections=[]):
        ## TODO decide on names
        self.locations = self.connection_locations = connection_locations
        self.connections = connections

    def get_locations(self, type_=None, exclude=[]):
        locs = [l for l in self.connection_locations if (type_ is None or l.type_ == type_) and l.type_ not in exclude]
        counter = dict()
        for l in locs:
            if l in counter:
                counter[l] += 1
            else:
                counter[l] = 1
        assert( np.all( [counter[l] == 1 for l in locs] ) )
        return locs

    def get_location_at(self, address, on_fwd_strand=True, new_type="crossover"):
        loc = None
        if (self.num_nts == 1):
            # import pdb
            # pdb.set_trace()
            ## Assumes that intrahelical connections have been made before crossovers
            for l in self.locations:
                if l.on_fwd_strand == on_fwd_strand and l.connection is None:
                    assert(loc is None)
                    loc = l
            # assert( loc is not None )
        else:
            for l in self.locations:
                if l.address == address and l.on_fwd_strand == on_fwd_strand:
                    assert(loc is None)
                    loc = l
        if loc is None:
            loc = Location( self, address=address, type_=new_type, on_fwd_strand=on_fwd_strand )
        return loc

    def get_connections_and_locations(self, connection_type=None, exclude=[]):
        """ Returns a list with each entry of the form:
            connection, location_in_self, location_in_other """
        type_ = connection_type
        ret = []
        for c in self.connections:
            if (type_ is None or c.type_ == type_) and c.type_ not in exclude:
                if   c.A.container is self:
                    ret.append( [c, c.A, c.B] )
                elif c.B.container is self:
                    ret.append( [c, c.B, c.A] )
                else:
                    import pdb
                    pdb.set_trace()
                    raise Exception("Object contains connection that fails to refer to object")
        return ret

    def _connect(self, other, connection, in_3prime_direction=None):
        ## TODO fix circular references        
        A,B = [connection.A, connection.B]
        if in_3prime_direction is not None:
            A.is_3prime_side_of_connection = not in_3prime_direction
            B.is_3prime_side_of_connection = in_3prime_direction
            
        A.connection = B.connection = connection
        self.connections.append(connection)
        other.connections.append(connection)
        l = A.container.locations
        if A not in l: l.append(A)
        l = B.container.locations
        if B not in l: l.append(B)
        

    # def _find_connections(self, loc):
    #     return [c for c in self.connections if c.A == loc or c.B == loc]

class SegmentParticle(PointParticle):
    def __init__(self, type_, position, name="A", segname="A", **kwargs):
        self.name = name
        self.contour_position = None
        PointParticle.__init__(self, type_, position, name=name, segname=segname, **kwargs)
        self.intrahelical_neighbors = []
        self.other_neighbors = []
        self.locations = []

    def get_intrahelical_above(self):
        """ Returns bead directly above self """
        assert( len(self.intrahelical_neighbors) <= 2 )
        for b in self.intrahelical_neighbors:
            if b.get_contour_position(self.parent) > self.contour_position:
                return b

    def get_intrahelical_below(self):
        """ Returns bead directly below self """
        assert( len(self.intrahelical_neighbors) <= 2 )
        for b in self.intrahelical_neighbors:
            if b.get_contour_position(self.parent) < self.contour_position:
                return b

    def _neighbor_should_be_added(self,b):
        c1 = self.contour_position
        c2 = b.get_contour_position(self.parent)
        if c2 < c1:
            b0 = self.get_intrahelical_below()
        else:
            b0 = self.get_intrahelical_above()

        if b0 is not None:            
            c0 = b0.get_contour_position(self.parent)
            if np.abs(c2-c1) < np.abs(c0-c1):
                ## remove b0
                self.intrahelical_neighbors.remove(b0)
                b0.intrahelical_neighbors.remove(self)
                return True
            else:
                return False
        return True
        
    def make_intrahelical_neighbor(self,b):
        add1 = self._neighbor_should_be_added(b)
        add2 = b._neighbor_should_be_added(self)
        if add1 and add2:
            assert(len(b.intrahelical_neighbors) <= 1)
            assert(len(self.intrahelical_neighbors) <= 1)
            self.intrahelical_neighbors.append(b)
            b.intrahelical_neighbors.append(self)

        
    # def get_nt_position(self,seg):
    #     if seg == self.parent:
    #         return seg.contour_to_nt_pos(self.contour_position)
    #     else:
    #         cl = [e for e in self.parent.get_connections_and_locations() if e[2].container is seg]

    #         dc = [(self.contour_position - A.address)**2 for c,A,B in cl]

    #         if len(dc) == 0:
    #             import pdb
    #             pdb.set_trace()

    #         i = np.argmin(dc)
    #         c,A,B = cl[i]
    #         ## TODO: generalize, removing np.abs and conditional 
    #         delta_nt = np.abs( A.container.contour_to_nt_pos(self.contour_position - A.address) )
    #         B_nt_pos = seg.contour_to_nt_pos(B.address)
    #         if B.address < 0.5:
    #             return B_nt_pos-delta_nt
    #         else:
    #             return B_nt_pos+delta_nt

    def get_nt_position(self,seg):
        if seg == self.parent:
            return seg.contour_to_nt_pos(self.contour_position)
        else:

            def get_nt_pos(contour1, seg1, seg2):
                cl = [e for e in seg1.get_connections_and_locations() if e[2].container is seg2]
                dc = [(contour1 - A.address)**2 for c,A,B in cl]
                if len(dc) == 0: return None

                i = np.argmin(dc)
                c,A,B = cl[i]

                ## TODO: generalize, removing np.abs and conditional 
                delta_nt = np.abs( seg1.contour_to_nt_pos(contour1 - A.address) )
                B_nt_pos = seg2.contour_to_nt_pos(B.address)
                if B.address < 0.5:
                    return B_nt_pos-delta_nt
                else:
                    return B_nt_pos+delta_nt
                
            pos = get_nt_pos(self.contour_position, self.parent, seg)
            if pos is None:
                ## Particle is not directly connected
                visited_segs = set(seg)
                positions = []
                for l in self.locations:
                    if l.container == self.parent: continue
                    pos0 = get_nt_pos(self.contour_position, self.parent, l.container)
                    assert(pos0 is not None)
                    pos0 = l.container.nt_pos_to_contour(pos0)
                    pos = get_nt_pos( pos0, l.container, seg )
                    if pos is not None:
                        positions.append( pos )
                assert( len(positions) > 0 )
                if len(positions) > 1:
                    import pdb
                    pdb.set_trace()
                pos = positions[0]
            return pos


    def get_contour_position(self,seg):
        if seg == self.parent:
            return self.contour_position
        else:
            nt_pos = self.get_nt_position(seg)
            return seg.nt_pos_to_contour(nt_pos)

## TODO break this class into smaller, better encapsulated pieces
class Segment(ConnectableElement, Group):

    """ Base class that describes a segment of DNA. When built from
    cadnano models, should not span helices """

    """Define basic particle types"""
    dsDNA_particle = ParticleType("D",
                                  diffusivity = 43.5,
                                  mass = 300,
                                  radius = 3,                 
                              )
    orientation_particle = ParticleType("O",
                                        diffusivity = 100,
                                        mass = 300,
                                        radius = 1,
                                    )

    # orientation_bond = HarmonicBond(10,2)
    orientation_bond = HarmonicBond(30,1.5, rRange = (0,500) )

    ssDNA_particle = ParticleType("S",
                                  diffusivity = 43.5,
                                  mass = 150,
                                  radius = 3,                 
                              )

    def __init__(self, name, num_nts, 
                 start_position = np.array((0,0,0)),
                 end_position = None, 
                 segment_model = None):

        Group.__init__(self, name, children=[])
        ConnectableElement.__init__(self, connection_locations=[], connections=[])

        self.resname = name
        self.start_orientation = None
        self.twist_per_nt = 0

        self.beads = [c for c in self.children] # self.beads will not contain orientation beads

        self._bead_model_generation = 0    # TODO: remove?
        self.segment_model = segment_model # TODO: remove?

        self.num_nts = int(num_nts)
        if end_position is None:
            end_position = np.array((0,0,self.distance_per_nt*num_nts)) + start_position
        self.start_position = start_position
        self.end_position = end_position

        ## Set up interpolation for positions
        a = np.array([self.start_position,self.end_position]).T
        tck, u = interpolate.splprep( a, u=[0,1], s=0, k=1)
        self.position_spline_params = tck
        
        self.sequence = None

    def clear_all(self):
        Group.clear_all(self)  # TODO: use super?
        self.beads = []
        for c,loc,other in self.get_connections_and_locations():
            loc.particle = None

    def contour_to_nt_pos(self, contour_pos, round_nt=False):
        nt = contour_pos*(self.num_nts) - 0.5
        if round_nt:
            assert( np.isclose(np.around(nt),nt) )
            nt = np.around(nt)
        return nt

    def nt_pos_to_contour(self,nt_pos):
        return (nt_pos+0.5)/(self.num_nts)

    def contour_to_position(self,s):
        p = interpolate.splev( s, self.position_spline_params )
        if len(p) > 1: p = np.array(p).T
        return p

    def contour_to_tangent(self,s):
        t = interpolate.splev( s, self.position_spline_params, der=1 )
        t = (t / np.linalg.norm(t,axis=0))
        return t.T
        

    def contour_to_orientation(self,s):
        assert( isinstance(s,float) or isinstance(s,int) or len(s) == 1 )   # TODO make vectorized version
        orientation = None
        if self.start_orientation is not None:
            # axis = self.start_orientation.dot( np.array((0,0,1)) )
            if self.quaternion_spline_params is None:
                axis = self.contour_to_tangent(s)
                orientation = rotationAboutAxis( axis, self.twist_per_nt*self.contour_to_nt_pos(s), normalizeAxis=True )
            else:
                q = interpolate.splev( s, self.quaternion_spline_params )
                if len(q) > 1: q = np.array(q).T # TODO: is this needed?
                orientation = quaternion_to_matrix(q)
        return orientation

    def get_contour_sorted_connections_and_locations(self,type_):
        sort_fn = lambda c: c[1].address
        cl = self.get_connections_and_locations(type_)
        return sorted(cl, key=sort_fn)
    
    def randomize_unset_sequence(self):
        bases = list(seqComplement.keys())
        # bases = ['T']        ## FOR DEBUG
        if self.sequence is None:
            self.sequence = [random.choice(bases) for i in range(self.num_nts)]
        else:
            assert(len(self.sequence) == self.num_nts) # TODO move
            for i in range(len(self.sequence)):
                if self.sequence[i] is None:
                    self.sequence[i] = random.choice(bases)

    def _get_num_beads(self, max_basepairs_per_bead, max_nucleotides_per_bead ):
        raise NotImplementedError

    def _generate_one_bead(self, contour_position, nts):
        raise NotImplementedError

    def _generate_atomic_nucleotide(self, contour_position, is_fwd, seq, scale):
        """ Seq should include modifications like 5T, T3 Tsinglet; direction matters too """

        # print("Generating nucleotide at {}".format(contour_position))
        
        pos = self.contour_to_position(contour_position)
        if self.local_twist:
            orientation = self.contour_to_orientation(contour_position)
            ## TODO: move this code (?)
            if orientation is None:
                axis = self.contour_to_tangent(contour_position)
                angleVec = np.array([1,0,0])
                if axis.dot(angleVec) > 0.9: angleVec = np.array([0,1,0])
                angleVec = angleVec - angleVec.dot(axis)*axis
                angleVec = angleVec/np.linalg.norm(angleVec)
                y = np.cross(axis,angleVec)
                orientation = np.array([angleVec,y,axis]).T
                ## TODO: improve placement of ssDNA
                # rot = rotationAboutAxis( axis, contour_position*self.twist_per_nt*self.num_nts, normalizeAxis=True )
                # orientation = rot.dot(orientation)
            else:
                orientation = orientation
                            
        else:
            raise NotImplementedError

        # key = self.sequence
        # if self.ntAt5prime is None and self.ntAt3prime is not None: key = "5"+key
        # if self.ntAt5prime is not None and self.ntAt3prime is None: key = key+"3"
        # if self.ntAt5prime is None and self.ntAt3prime is None: key = key+"singlet"

        key = seq
        if not is_fwd:
            nt_dict = canonicalNtFwd
        else:
            nt_dict = canonicalNtRev
        atoms = nt_dict[ key ].generate() # TODO: clone?
                        
        atoms.orientation = orientation.dot(atoms.orientation)
        if isinstance(self, SingleStrandedSegment):
            if scale is not None and scale != 1:
                for a in atoms:
                    a.position = scale*a.position
                    a.beta = 0
            atoms.position = pos - atoms.atoms_by_name["C1'"].collapsed_position()
        else:
            if scale is not None and scale != 1:
                if atoms.sequence in ("A","G"):
                    r0 = atoms.atoms_by_name["N9"].position
                else:
                    r0 = atoms.atoms_by_name["N1"].position
                for a in atoms:
                    if a.name[-1] in ("'","P","T"):
                        a.position = scale*(a.position-r0) + r0
                        a.beta = 0
            atoms.position = pos

        return atoms

    def add_location(self, nt, type_, on_fwd_strand=True):
        ## Create location if needed, add to segment
        c = self.nt_pos_to_contour(nt)
        assert(c >= 0 and c <= 1)
        # TODO? loc = self.Location( address=c, type_=type_, on_fwd_strand=is_fwd )
        loc = Location( self, address=c, type_=type_, on_fwd_strand=on_fwd_strand )
        self.locations.append(loc)

    ## TODO? Replace with abstract strand-based model?
    def add_5prime(self, nt, on_fwd_strand=True):
        self.add_location(nt,"5prime",on_fwd_strand)

    def add_3prime(self, nt, on_fwd_strand=True):
        self.add_location(nt,"3prime",on_fwd_strand)

    def get_3prime_locations(self):
        return self.get_locations("3prime")
    
    def get_5prime_locations(self):
        ## TODO? ensure that data is consistent before _build_model calls
        return self.get_locations("5prime")

    def iterate_connections_and_locations(self, reverse=False):
        ## connections to other segments
        cl = self.get_contour_sorted_connections_and_locations()
        if reverse:
            cl = cl[::-1]
            
        for c in cl:
            yield c

    ## TODO rename
    def get_strand_segment(self, nt_pos, is_fwd, move_at_least=0.5):
        """ Walks through locations, checking for crossovers """
        # if self.name in ("6-1","1-1"):
        #     import pdb
        #     pdb.set_trace()
        move_at_least = 0

        ## Iterate through locations
        # locations = sorted(self.locations, key=lambda l:(l.address,not l.on_fwd_strand), reverse=(not is_fwd))
        locations = sorted(self.locations, key=lambda l:(l.address,not l.on_fwd_strand), reverse=(not is_fwd))
        # print(locations)

        for l in locations:
            # TODOTODO probably okay
            if l.address == 0:
                pos = 0.0
            elif l.address == 1:
                pos = self.num_nts-1
            else:
                pos = self.contour_to_nt_pos(l.address, round_nt=True)

            ## DEBUG

            # import pdb
            # pdb.set_trace()

            ## Skip locations encountered before our strand
            # tol = 0.1
            # if is_fwd:
            #     if pos-nt_pos <= tol: continue 
            # elif   nt_pos-pos <= tol: continue
            if (pos-nt_pos)*(2*is_fwd-1) < move_at_least: continue
            ## TODO: remove move_at_least
            if np.isclose(pos,nt_pos):
                if l.is_3prime_side_of_connection: continue

            ## Stop if we found the 3prime end
            if l.on_fwd_strand == is_fwd and l.type_ == "3prime":
                print("  found end at",l)
                return pos, None, None, None, None

            ## Check location connections
            c = l.connection
            if c is None: continue
            B = c.other(l)            

            ## Found a location on the same strand?
            if l.on_fwd_strand == is_fwd:
                print("  passing through",l)
                print("from {}, connection {} to {}".format(nt_pos,l,B))
                try:
                    Bpos = B.container.contour_to_nt_pos(B.address, round_nt=True)
                except:
                    if B.address == 0:
                        Bpos = 0
                    elif B.address == 1:
                        Bpos = B.container.num_nts-1
                    else:
                        raise
                return pos, B.container, Bpos, B.on_fwd_strand, 0.5
                
            ## Stop at other strand crossovers so basepairs line up
            elif c.type_ == "crossover":
                if nt_pos == pos: continue
                print("  pausing at",l)
                return pos, l.container, pos+(2*is_fwd-1), is_fwd, 0

        import pdb
        pdb.set_trace()
        raise Exception("Shouldn't be here")
        # print("Shouldn't be here")
        ## Made it to the end of the segment without finding a connection
        return 1*is_fwd, None, None, None

    def get_nearest_bead(self, contour_position):
        if len(self.beads) < 1: return None
        cs = np.array([b.contour_position for b in self.beads]) # TODO: cache
        # TODO: include beads in connections?
        i = np.argmin((cs - contour_position)**2)

        return self.beads[i]

    def get_all_consecutive_beads(self, number):
        assert(number >= 1)
        ## Assume that consecutive beads in self.beads are bonded
        ret = []
        for i in range(len(self.beads)-number+1):
            tmp = [self.beads[i+j] for j in range(0,number)]
            ret.append( tmp )
        return ret   

    def _add_bead(self,b,set_contour=False):
        if set_contour:
            b.contour_position = b.get_contour_position(self)
        
        # assert(b.parent is None)
        if b.parent is not None:
            b.parent.children.remove(b)
        self.add(b)
        self.beads.append(b) # don't add orientation bead
        if "orientation_bead" in b.__dict__: # TODO: think of a cleaner approach
            o = b.orientation_bead
            o.contour_position = b.contour_position
            if o.parent is not None:
                o.parent.children.remove(o)
            self.add(o)
            self.add_bond(b,o, Segment.orientation_bond, exclude=True)

    def _rebuild_children(self, new_children):
        # print("_rebuild_children on %s" % self.name)
        old_children = self.children
        old_beads = self.beads
        self.children = []
        self.beads = []

        if True:
            print("WARNING: DEBUG")
            ## Remove duplicates, preserving order
            tmp = []
            for c in new_children:
                if c not in tmp:
                    tmp.append(c)
                else:
                    print("  duplicate particle found!")
            new_children = tmp

        for b in new_children:
            self.beads.append(b)
            self.children.append(b)
            if "orientation_bead" in b.__dict__: # TODO: think of a cleaner approach
                self.children.append(b.orientation_bead)
            
        # tmp = [c for c in self.children if c not in old_children]
        # assert(len(tmp) == 0)
        # tmp = [c for c in old_children if c not in self.children]
        # assert(len(tmp) == 0)
        assert(len(old_children) == len(self.children))
        assert(len(old_beads) == len(self.beads))


    def _generate_beads(self, bead_model, max_basepairs_per_bead, max_nucleotides_per_bead):

        """ Generate beads (positions, types, etc) and bonds, angles, dihedrals, exclusions """
        ## TODO: decide whether to remove bead_model argument
        ##       (currently unused)

        ## First find points between-which beads must be generated
        # conn_locs = self.get_contour_sorted_connections_and_locations()
        # locs = [A for c,A,B in conn_locs]
        # existing_beads = [l.particle for l in locs if l.particle is not None]
        existing_beads = {l.particle for l in self.locations if l.particle is not None}
        existing_beads = sorted( list(existing_beads), key=lambda b: b.get_contour_position(self) )
        
        if len(existing_beads) != len(set(existing_beads)):
            pdb.set_trace()
        for b in existing_beads:
            assert(b.parent is not None)

        # if self.name == "1-1":
        #     import pdb
        #     pdb.set_trace()

        ## Add ends if they don't exist yet
        ## TODOTODO: test 1 nt segments?
        if len(existing_beads) == 0 or existing_beads[0].get_nt_position(self) > 0.5:
            # if len(existing_beads) > 0:            
            #     assert(existing_beads[0].get_nt_position(self) >= 0.5)
            b = self._generate_one_bead(0, 0)
            existing_beads = [b] + existing_beads

        if existing_beads[-1].get_nt_position(self)-(self.num_nts-1) < -0.5:
            b = self._generate_one_bead(1, 0)
            existing_beads.append(b)
        assert(len(existing_beads) > 1)

        ## Walk through existing_beads, add beads between
        tmp_children = []       # build list of children in nice order
        last = None
        for I in range(len(existing_beads)-1):
            eb1,eb2 = [existing_beads[i] for i in (I,I+1)]
            assert( eb1 is not eb2 )

            # if np.isclose(eb1.position[2], eb2.position[2]):
            #     import pdb
            #     pdb.set_trace()

            print(" %s working on %d to %d" % (self.name, eb1.position[2], eb2.position[2]))
            e_ds = eb2.get_contour_position(self) - eb1.get_contour_position(self)
            num_beads = self._get_num_beads( e_ds, max_basepairs_per_bead, max_nucleotides_per_bead )
            ds = e_ds / (num_beads+1)
            nts = ds*self.num_nts
            eb1.num_nts += 0.5*nts
            eb2.num_nts += 0.5*nts

            ## Add beads
            if eb1.parent == self:
                tmp_children.append(eb1)

            s0 = eb1.get_contour_position(self)
            if last is not None:
                last.make_intrahelical_neighbor(eb1)
            last = eb1
            for j in range(num_beads):
                s = ds*(j+1) + s0
                b = self._generate_one_bead(s,nts)

                last.make_intrahelical_neighbor(b)
                last = b
                tmp_children.append(b)

        last.make_intrahelical_neighbor(eb2)

        if eb2.parent == self:
            tmp_children.append(eb2)
        self._rebuild_children(tmp_children)

    def _regenerate_beads(self, max_nts_per_bead=4, ):
        ...
    

class DoubleStrandedSegment(Segment):

    """ Class that describes a segment of ssDNA. When built from
    cadnano models, should not span helices """

    def __init__(self, name, num_nts, start_position = np.array((0,0,0)),
                 end_position = None, 
                 segment_model = None,
                 local_twist = False,
                 num_turns = None,
                 start_orientation = None,
                 twist_persistence_length = 90 ):
        
        self.helical_rise = 10.44
        self.distance_per_nt = 3.4
        Segment.__init__(self, name, num_nts, 
                         start_position,
                         end_position, 
                         segment_model)

        self.local_twist = local_twist
        if num_turns is None:
            num_turns = float(num_nts) / self.helical_rise
        self.twist_per_nt = float(360 * num_turns) / num_nts

        if start_orientation is None:
            start_orientation = np.eye(3) # np.array(((1,0,0),(0,1,0),(0,0,1)))
        self.start_orientation = start_orientation
        self.twist_persistence_length = twist_persistence_length

        self.nicks = []

        self.start = self.start5 = Location( self, address=0, type_= "end5" )
        self.start3 = Location( self, address=0, type_ = "end3", on_fwd_strand=False )

        self.end = self.end3 = Location( self, address=1, type_ = "end3" )
        self.end5 = Location( self, address=1, type_= "end5", on_fwd_strand=False )
        # for l in (self.start5,self.start3,self.end3,self.end5):
        #     self.locations.append(l)

        ## Set up interpolation for azimuthal angles 
        a = np.array([self.start_position,self.end_position]).T
        tck, u = interpolate.splprep( a, u=[0,1], s=0, k=1)
        self.position_spline_params = tck
        
        ## TODO: initialize sensible spline for orientation
        self.quaternion_spline_params = None


    ## Convenience methods
    ## TODO: add errors if unrealistic connections are made
    ## TODO: make connections automatically between unconnected strands
    def connect_start5(self, end3, type_="intrahelical", force_connection=False):
        if isinstance(end3, SingleStrandedSegment):
            end3 = end3.end3
        self._connect_ends( self.start5, end3, type_, force_connection = force_connection )
    def connect_start3(self, end5, type_="intrahelical", force_connection=False):
        if isinstance(end5, SingleStrandedSegment):
            end5 = end5.start5
        self._connect_ends( self.start3, end5, type_, force_connection = force_connection )
    def connect_end3(self, end5, type_="intrahelical", force_connection=False):
        if isinstance(end5, SingleStrandedSegment):
            end5 = end5.start5
        self._connect_ends( self.end3, end5, type_, force_connection = force_connection )
    def connect_end5(self, end3, type_="intrahelical", force_connection=False):
        if isinstance(end3, SingleStrandedSegment):
            end3 = end3.end3
        self._connect_ends( self.end5, end3, type_, force_connection = force_connection )

    def add_crossover(self, nt, other, other_nt, strands_fwd=[True,False], nt_on_5prime=True):
        """ Add a crossover between two helices """
        ## Validate other, nt, other_nt
        ##   TODO

        if isinstance(other,SingleStrandedSegment):
            other.add_crossover(other_nt, self, nt, strands_fwd[::-1], not nt_on_5prime)
        else:

            ## Create locations, connections and add to segments
            c = self.nt_pos_to_contour(nt)
            assert(c >= 0 and c <= 1)

            loc = self.get_location_at(c, strands_fwd[0])

            c = other.nt_pos_to_contour(other_nt)
            # TODOTODO: may need to subtract or add a little depending on 3prime/5prime
            assert(c >= 0 and c <= 1)
            other_loc = other.get_location_at(c, strands_fwd[1])
            self._connect(other, Connection( loc, other_loc, type_="crossover" ))
            if nt_on_5prime:
                loc.is_3prime_side_of_connection = False
                other_loc.is_3prime_side_of_connection = True
            else:            
                loc.is_3prime_side_of_connection = True
                other_loc.is_3prime_side_of_connection = False

    ## Real work
    def _connect_ends(self, end1, end2, type_, force_connection):
        ## TODO remove self?
        ## validate the input
        for end in (end1, end2):
            assert( isinstance(end, Location) )
            assert( end.type_ in ("end3","end5") )
        assert( end1.type_ != end2.type_ )
        ## Create and add connection
        if end2.type_ == "end5":
            end1.container._connect( end2.container, Connection( end1, end2, type_=type_ ), in_3prime_direction=True )
        else:
            end2.container._connect( end1.container, Connection( end2, end1, type_=type_ ), in_3prime_direction=True )
    def _get_num_beads(self, contour, max_basepairs_per_bead, max_nucleotides_per_bead):
        return int(contour*self.num_nts // max_basepairs_per_bead)

    def _generate_one_bead(self, contour_position, nts):
        pos = self.contour_to_position(contour_position)
        if self.local_twist:
            orientation = self.contour_to_orientation(contour_position)
            if orientation is None:
                print("WARNING: local_twist is True, but orientation is None; using identity")
                orientation = np.eye(3)
            opos = pos + orientation.dot( np.array((Segment.orientation_bond.r0,0,0)) )
            o = SegmentParticle( Segment.orientation_particle, opos, nts,
                                 num_nts=nts, parent=self )
            bead = SegmentParticle( Segment.dsDNA_particle, pos, name="DNA",
                                    num_nts=nts, parent=self, 
                                    orientation_bead=o,
                                    contour_position=contour_position )

        else:
            bead = SegmentParticle( Segment.dsDNA_particle, pos, name="DNA",
                                    num_nts=nts, parent=self,
                                    contour_position=contour_position )
        self._add_bead(bead)
        return bead

class SingleStrandedSegment(Segment):

    """ Class that describes a segment of ssDNA. When built from
    cadnano models, should not span helices """

    def __init__(self, name, num_nts, start_position = np.array((0,0,0)),
                 end_position = None, 
                 segment_model = None):

        self.distance_per_nt = 5
        Segment.__init__(self, name, num_nts, 
                         start_position,
                         end_position, 
                         segment_model)

        self.start = self.start5 = Location( self, address=0, type_= "end5" ) # TODO change type_?
        self.end = self.end3 = Location( self, address=1, type_ = "end3" )
        # for l in (self.start5,self.end3):
        #     self.locations.append(l)

    def connect_end3(self, end5, force_connection=False):
        self._connect_end( end5,  _5_to_3 = True, force_connection = force_connection )

    def connect_5end(self, end3, force_connection=False): # TODO: change name or possibly deprecate
        self._connect_end( end3,  _5_to_3 = False, force_connection = force_connection )

    def _connect_end(self, other, _5_to_3, force_connection):
        assert( isinstance(other, Location) )
        if _5_to_3 == True:
            my_end = self.end3
            # assert( other.type_ == "end5" )
            if (other.type_ is not "end5"):
                print("Warning: code does not prevent connecting 3prime to 3prime, etc")
            conn = Connection( my_end, other, type_="intrahelical" )
            self._connect( other.container, conn, in_3prime_direction=True )
        else:
            my_end = self.end5
            # assert( other.type_ == "end3" )
            if (other.type_ is not "end3"):
                print("Warning: code does not prevent connecting 3prime to 3prime, etc")
            conn = Connection( other, my_end, type_="intrahelical" )
            other.container._connect( self, conn, in_3prime_direction=True )

    def add_crossover(self, nt, other, other_nt, strands_fwd=[True,False], nt_on_5prime=True):
        """ Add a crossover between two helices """
        ## Validate other, nt, other_nt
        ##   TODO
       
        ## TODO: fix direction

        # c1 = self.nt_pos_to_contour(nt)
        # # TODOTODO
        # ## Ensure connections occur at ends, otherwise the structure doesn't make sense
        # # assert(np.isclose(c1,0) or np.isclose(c1,1))
        # assert(np.isclose(nt,0) or np.isclose(nt,self.num_nts-1))
        if nt == 0:
            c1 = 0
        elif nt == self.num_nts-1:
            c1 = 1
        else:
            raise Exception("Crossovers can only be at the ends of an ssDNA segment")
        loc = self.get_location_at(c1, True)

        if other_nt == 0:
            c2 = 0
        elif other_nt == other.num_nts-1:
            c2 = 1
        else:
            c2 = other.nt_pos_to_contour(other_nt)

        if isinstance(other,SingleStrandedSegment):
            ## Ensure connections occur at opposing ends
            assert(np.isclose(other_nt,0) or np.isclose(other_nt,self.num_nts-1))
            other_loc = other.get_location_at( c2, True )
            if ("22-2" in (self.name, other.name)):
                pdb.set_trace()
            if nt_on_5prime:
                self.connect_end3( other_loc )
            else:
                other.connect_end3( self )

        else:
            assert(c2 >= 0 and c2 <= 1)
            other_loc = other.get_location_at( c2, strands_fwd[1] )
            if nt_on_5prime:
                self._connect(other, Connection( loc, other_loc, type_="sscrossover" ), in_3prime_direction=True )
            else:
                other._connect(self, Connection( other_loc, loc, type_="sscrossover" ), in_3prime_direction=True )

    def _get_num_beads(self, contour, max_basepairs_per_bead, max_nucleotides_per_bead):
        return int(contour*self.num_nts // max_nucleotides_per_bead)

    def _generate_one_bead(self, contour_position, nts):
        pos = self.contour_to_position(contour_position)
        b = SegmentParticle( Segment.ssDNA_particle, pos, 
                             name="NAS",
                             num_nts=nts, parent=self,
                             contour_position=contour_position )
        self._add_bead(b)
        return b

    
class StrandInSegment(Group):
    """ Class that holds atomic model, maps to segment """
    
    def __init__(self, segment, start, end, is_fwd):
        """ start/end should be provided expressed in nt coordinates, is_fwd tuples """
        Group.__init__(self)
        self.num_nts = 0
        # self.sequence = []
        self.segment = segment
        self.start = start
        self.end = end
        self.is_fwd = is_fwd

        nts = np.abs(end-start)+1
        self.num_nts = int(round(nts))
        assert( np.isclose(self.num_nts,nts) )

        # print(" Creating {}-nt StrandInSegment in {} from {} to {} {}".format(self.num_nts, segment.name, start, end, is_fwd))
    
    def _nucleotide_ids(self):
        nt0 = self.start # seg.contour_to_nt_pos(self.start)
        assert( np.abs(nt0 - round(nt0)) < 1e-5 )
        nt0 = int(round(nt0))
        assert( (self.end-self.start) >= 0 or not self.is_fwd )

        direction = (2*self.is_fwd-1)
        return range(nt0,nt0 + direction*self.num_nts, direction)

    def get_sequence(self):
        """ return 5-to-3 """
        # TODOTODO test
        seg = self.segment
        if self.is_fwd:
            return [seg.sequence[nt] for nt in self._nucleotide_ids()]
        else:
            return [seqComplement[seg.sequence[nt]] for nt in self._nucleotide_ids()]
    
    def get_contour_points(self):
        c0,c1 = [self.segment.nt_pos_to_contour(p) for p in (self.start,self.end)]
        return np.linspace(c0,c1,self.num_nts)
            
class Strand(Group):
    """ Class that holds atomic model, maps to segments """
    def __init__(self, segname = None):
        Group.__init__(self)
        self.num_nts = 0
        self.children = self.strand_segments = []
        self.segname = segname

    ## TODO disambiguate names of functions
    def add_dna(self, segment, start, end, is_fwd):
        # TODOTODO use nt pos ? 
        """ start/end should be provided expressed as contour_length, is_fwd tuples """
        if not (segment.contour_to_nt_pos(np.abs(start-end)) > 0.9):
            import pdb
            pdb.set_trace()
        for s in self.strand_segments:
            if s.segment == segment and s.is_fwd == is_fwd:
                # assert( s.start not in (start,end) )
                # assert( s.end not in (start,end) )
                if s.start in (start,end) or s.end in (start,end):
                    import pdb
                    pdb.set_trace()
                    print("  CIRCULAR DNA")

        s = StrandInSegment( segment, start, end, is_fwd )
        self.add( s )
        self.num_nts += s.num_nts

    def set_sequence(self,sequence): # , set_complement=True):
        ## validate input
        assert( len(sequence) >= self.num_nts )
        assert( np.all( [i in ('A','T','C','G') for i in sequence] ) )
        
        seq_idx = 0
        ## set sequence on each segment
        for s in self.children:
            seg = s.segment
            if seg.sequence is None:
                seg.sequence = [None for i in range(seg.num_nts)]

            if s.is_fwd:
                for nt in s._nucleotide_ids():
                    seg.sequence[nt] = sequence[seq_idx]
                    seq_idx += 1
            else:
                for nt in s._nucleotide_ids():
                    seg.sequence[nt] = seqComplement[sequence[seq_idx]]
                    seq_idx += 1